Prospect Fastener Corp.  

Wauconda,  IL 
United States
https://www.prospectfastener.com
  • Booth: 1331


Prospect Fastener is a Master Distributor of value.

Prospect Fastener is a Master Distributor of value. We build a transparent gateway between our manufacturers and our customers by listening to what you want and how you need it. We relieve hidden costs in your supply chain, expand your product lines and eliminate risks. We distribute value.

Brands: Rotor Clip, KMC Stampings, Driv-Lok, Davies Molding, Kerr Lakeside

 Products

  • C-25ST ZD
    1/4 in. C-Style External Ring, 0.025 In. Thick Carbon Steel Zinc Dich...

    • C-Style external retaining ring in carbon steel, zinc yellow finish. Crescent C-Style retaining rings are ideal for low clearance applications where radial installation is preferred.
  • CDV0909Z1
    9/16 In. Double Tube in Galvanized Steel, with Vinyl Cushion and 0.281 Screw Hole...

    • Double tube clamp, furnished open, manufactured from hot dipped galvanized steel, chem-treated G90, per ASTM A653/A653M, black vinyl plastisol cushion. Designed for clamping two tubes of equal diameters. Round top hole, slotted lower hole for easy alignment. A vinyl coating dampens vibration and noise while securing your lines while also providing abrasion resistance.
  • CG-118SJ
    External Hvy Duty Spiral Ring TRUWAVE...

    • Heavy duty external spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • CG-93ST OIL
    15/16 In. External Hvy Duty Spiral Ring TRUWAVE...

    • Heavy duty external spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • CJV0709Z1
    3/8 In. J-Clip in Galvanized Steel, with Vinyl Cushion and 0.281 Screw Hole...

    • J-clip, manufactured from hot dipped galvanized steel, chem-treated G90, per ASTM A653/A653M, with black vinyl plastisol coating. J-clips are used to hold or clamp a wire or tube in its proper location in an assembly. For applications where clip is installed first and wiring is added later. This clip can be pinched shut with screwdriver blade or pliers. A vinyl coating dampens vibration and noise while securing your lines while also providing abrasion resistance.
  • CL-125ST OIL
    1-1/4 In. External Light Duty Spiral Ring TRUWAVE...

    • Light duty external spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • CLD1250250HDK
    Hvy Duty Coiled Spring Pin 0.125 In. Dia X 0.25 In. Long 302 Stainless Steel Plain...

    • Heavy duty, coiled spiral pin in 320 Stainless steel, furnished plain. A coiled spring pin, also known as a spiral pin, is a self retaining engineered fastener manufactured by roll forming metal strip into a spiral cross section of 2-1/4 coils. Coiled spring pins have a body diameter larger than the recommended hole diameter and chamfers on both ends to facilitate starting the pin into the hole, the spring action of the pin allows it to compress as it assumes the diameter of the hole.
  • CLD2501000MBK
    Std Duty Coiled Spring Pin 0.25 In. Dia X 1 In. Long Carbon Steel Plain...

    • Standard duty, coiled spiral pin in carbon steel, furnished plain. A coiled spring pin, also known as a spiral pin, is a self retaining engineered fastener manufactured by roll forming metal strip into a spiral cross section of 2-1/4 coils. Coiled spring pins have a body diameter larger than the recommended hole diameter and chamfers on both ends to facilitate starting the pin into the hole, the spring action of the pin allows it to compress as it assumes the diameter of the hole.
  • CM-87ST OIL
    7/8 In. External Med Duty Spiral Ring TRUWAVE...

    • Medium duty external spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • COL0809Z1
    1/2 In Dia. Med Duty, Rubber Cushion Clamp 0.281 Hole...

    • Medium duty cushion clamp, furnished open, manufactured from hot dipped galvanized steel, chem-treated G90, per ASTM A653/A653M, EPDM rubber cushion. The EPDM cushion has excellent resistance to ozone, aging, steam, water and provides better vibration and noise damping than a vinyl coating. Offset in lower leg to allow flush surface mount.
  • COL1209SSS
    3/4 In. Med Duty 304 Stainless Clamp with Silicone Cushion and 0.281 Screw Hole...

    • Medium duty cushion clamp, furnished open, manufactured from 304 Stainless, Orange Silicone rubber cushion. The Silicone cushion has superior resistance to heat, age, sunlight, water, and Ozone, as well as being resistant to most chemicals and oils. Offset in lower leg to allow flush surface mount.
  • COV1313Z1
    3/4 In. Med Duty Clamp in Galvanized Steel, with Vinyl Cushion and 0.406 Screw Hole...

    • Medium duty cushion clamp, furnished open, manufactured from hot dipped galvanized steel, chem-treated G90, per ASTM A653/A653M, with black vinyl plastisol coating. A vinyl coating dampens vibration and noise while securing your lines while also providing abrasion resistance. KMC's most popular clamp for holding wiring and tubes. Furnished open to allow the clip to be snapped over wiring or tube, then closed with the bolt at assembly. contoured to minimize distortion during clamping.
  • COV3313Z1
    2 In. Med Duty Clamp in Galvanized Steel, with Vinyl Cushion and 0.406 Screw Hole...

    • Medium duty cushion clamp, furnished open, manufactured from hot dipped galvanized steel, chem-treated G90, per ASTM A653/A653M, with black vinyl plastisol coating. A vinyl coating dampens vibration and noise while securing your lines while also providing abrasion resistance. KMC's most popular clamp for holding wiring and tubes. Furnished open to allow the clip to be snapped over wiring or tube, then closed with the bolt at assembly. contoured to minimize distortion during clamping.
  • CTB-42ST FS
    42 mm Constant Tension Band Clamp with Dorrflake Silver Finish...

    • Self compensating band clamp for hose and tube applications.
  • CTL-8ST PA
    1/2 in. Light Duty Band Clamp with Phosphate Finish...

    • Self compensating band clamp for hose and tube applications.
  • DHO-100ST PD
    100 mm Housing Dia, DIN472 Internal Ring, Carbon Steel, Phosphate & Oil...

    • Metric basic internal retaining ring in carbon steel manufactured to DIN472. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • DSH-90ST PD
    90 mm Shaft Dia, DIN471 External Ring, Carbon Steel, Phosphate & Oil...

    • Metric basic external retaining ring in carbon steel manufactured to DIN471. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • DW-8ST R
    1/2 in. Double Wire Hose Clamp with Zinc Red Finish...

    • Double wire clamps are used where a lower clamping force offered by single wire clamps is sufficient.
  • E-25ST PA
    1/4 in. E-Style External Ring, 0.025 In. Thick Carbon Steel Black Phosphate...

    • External E-Style retaining ring in carbon steel, phosphate finish. Perhaps the most popular and widely used radial retaining ring is the E-Style, (so named because it is shaped like the letter E.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
  • E-87SS
    7/8 in. E-Style External Ring, 0.05 In. Thick Stainless Passivated...

    • External E-Style retaining ring in stainless steel. Perhaps the most popular and widely used radial retaining ring is the E-Style, (so named because it is shaped like the letter E.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
  • GA2501000G2ZN
    1/4 x 1 Grooved Pin, Type A, Low Carbon Steel, Zinc Plated...

    • Grooved pins are non-threaded press fit fasteners. Commonly used as locking devices, pivots, bearing faces or locating elements where there is not a high degree of end load.
  • GE1251000G2ZN
    1/8 X 1 Grooved Pin, Type E, Low Carbon Steel, Zinc Plated...

    • Grooved pins are non-threaded press fit fasteners. Commonly used as locking devices, pivots, bearing faces or locating elements where there is not a high degree of end load.
  • HC-14SS
    7/8 in. Single Wire Hose Clamp with Stainless Steel Finish...

    • Rotor Clip brand, American-made hose clamps
  • HO-250ST PA
    2-1/2 in. Dia Internal Ring, 0.078 In. Thick Carbon Steel Black Phosphate...

    • Basic internal retaining ring in carbon steel, phosphate finish. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • HO-50SS
    1/2 in. Dia Internal Ring, 0.035 In. Thick Stainless Passivated...

    • Basic internal retaining ring in stainless steel, passivated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • KG-100SJ
    1.00 In. Internal Hvy Duty Spiral Ring Manufactured by Rotor Clip TRUWAVE...

    • Heavy duty internal spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • KG-131ST OIL
    1-5/16 In. Internal Hvy Duty Spiral Ring Manufactured by Rotor Clip TRUWAVE...

    • Heavy duty internal spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • KL-250SJ
    2-1/2 In. Internal Light Duty Spiral Ring Manufactured by Rotor Clip TRUWAVE...

    • Light duty internal spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • KM-250ST OIL
    2-1/2 In. Internal Med Duty Spiral Ring Manufactured by Rotor Clip TRUWAVE...

    • Medium duty internal spiral retaining ring carbon steel, plain. Spiral retaining rings are axially installed into housings/bores (internal) or onto shafts (external), making 360° contact with the groove. Spiral retaining rings have no ears or lugs to interfere with the assembly. These rings are manufactured by coiling flat wire into the shape of the finished retaining ring. Spiral rings are provided with a removal notch to simplify the removal process. No special tools are required for installation or removal. Spiral retaining rings can be economically produced in special alloys like stainless steel because the manufacturing process eliminates scrap.
  • SH-200ST PA
    2 in. Dia External Ring, 0.062 In. Thick Carbon Steel Phosphate...

    • Basic external retaining ring in carbon steel, phosphate finish. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • SH-87SS
    7/8 in. Dia External Ring, 0.042 In. Thick Stainless Passivated...

    • Basic external retaining ring in stainless steel, passivated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • SLTP1871000CP
    Slotted Spring Pin 0.187 in. Dia 1.00 in. Long 420 Stainless Passivated...

    • Spring pin, slotted, 0.187 in. Diameter 1.00 in. long 420 stainless steel passivated. A spring pin (also called tension pin or roll pin) is a mechanical fastener that secures the position of two or more parts of a machine relative to each other. Spring pins have a body diameter which is larger than the hole diameter, and a chamfer on either one or both ends to facilitate starting the pin into the hole. The spring action of the pin allows it to compress as it assumes the diameter of the hole. The radial force exerted by the pin against the hole wall retains it in the hole, therefore a spring pin is considered a self retaining fastener.
  • TP0500250PL
    #5 X 2 1/2 In. Taper Pin, Carbon Steel, Plain...

    • Standard taper pins are solid pins that have a uniform, full-length taper. Taper pins are easily removed by pounding a punch or drive tool into the small end.
  • TTP0600500PL
    #6 X 5 In. Threaded Taper Pin, Carbon Steel...

    • Threaded taper pins are used whenever a taper pin has to be removed from the driven side. Threaded taper pins are 0.002" smaller on the large end diameter to allow the pin to be inserted approximately 3/32" deper int the taper-reamed hole. The lare end of the pin is recessed below the surface which allows the nut to bear on the surface when tightened to pull the pin out.

Categories

Clamps
  • Clamps - General
  • Hose
    • Knobs & Handles
  • Knobs & Handles - General
    • Metrics Fasteners
  • Pins
  • Retaining Rings
    • Pins
  • Pins - General
    • Retaining Rings
  • Retaining Rings - General
    • Socket Screws
  • Socket Screws - General
    • Back to the Search
    Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined